NORAC UC4+BC+WR2 - Manual (Page 20)

17
4.6.2 Valve Mounting
1. Install the mounting plate (B10) with 1/2"
NC bolts, and washers to the sprayer. Two
holes must be drilled and tapped on the
sprayer to facilitate mounting of the plate.
Use the plate (B10) as a template to locate
the holes where required. The plate must
overhang the frame to allow the valve to be
bolted to it. Figure 21 shows the mounting
location for B10 and the valves.
2. Mount the NORAC valve (Item V01) on
the mounting plate using the 3/8" bolts and
washers.
You must ensure no hydraulic
components will interfere with any
sprayer parts, or be pulled tight at
any time.
Figure 21: Valve Mounting Example