NORAC UC4+BC+AP2 - Manual (Page 22)

19
4.7 E
LECTRICAL
I
NSTALLATION
1. Install the UC4+ Control Panel (E01) in
the cab of the sprayer. Mount the panel
where it will be clearly visible and within
easy reach of the operator.
A good spot to mount the UC4+
control panel is on the right hand rear
side of the cab, near the side window.
An adapter for the flexible panel mount
that has a 3/8" NC threaded stud on the
end to bolt through an existing mount
can also be purchased. You can find
these at your local outdoor store as a
RAM mount part number RAM-B-236.
(See http://www.ram-mount.com/)
Figure 22: Control Panel Mounting
ROP