Casio XJ-460 - Manual (Page 72)

72
Appendix
2.
Keeping the left nub ( 3 ) in the left depression ( 1 ), gently press the
lens cover towards the right as you insert the nub ( 4 ) of the right lens
cover tab into the depression ( 2 ) of the right tab under the lens.
z Do not apply undue force to the lens cover when performing the above step. Pressing
too strongly can damage the tabs of the lens cover.
Check the following items whenever you experience any problem with the projector.
Projector Troubleshooting
Problem Cause and Recommended Action See
The projector does not turn
on when I press the [
]
(power) key.
If the POWER/STANDBY indicator is not lit, the
AC power cord may not be connected correctly.
J Make sure the AC power cord is connected
correctly to the projector and the power outlet
(see “Turning On the Projector”).
User’s
Guide
(Basic
Operation)
If the TEMP or LAMP indicator remains flashing
or lit, it means some type of error has occurred.
J See “Error Indicators” under “Indicators and
Alert Tones”.
User’s
Guide
(Basic
Operation)