Casio XJ-460 - Manual (Page 29)

Using the Setup Menu
29
Initializing Settings
The setup menu lets you initialize the settings of a particular main menu item, or for all
setup menu items.
To initialize the settings of a particular main menu item
Example: To initialize the settings of the “Image Adjustment” main menu item.
z Performing the following procedure returns all of the sub-menu items under the currently
selected main menu item to their initial default settings.
z Initializing the settings of the “Image Adjustment” main menu item returns the “Vertical
Position”, “Horizontal Position”, “Frequency”, and “Phase” settings of the current signal
type only (XGA/60Hz, SXGA/60Hz, etc.) to their initial defaults.
1.
Select the input source whose settings you want to initialize.
2.
Perform steps 2 through 4 under “Basic Setup Menu Operations” on
page 24. Select the “Image Adjustment” main menu, and then select
the “Restore Menu Defaults” sub-menu item.
3.
Press the [ENTER] key.
z This displays a confirmation message asking if you want to initialize settings.
4.
Use the [
S] and [T] keys to select [Yes].
5.
Press the [ENTER] key to initialize the menu’s settings, or the [ESC]
key to exit the initialize operation without doing anything.
z Pressing the [ENTER] key returns all of the sub-menu items on the currently selected
main menu to their initial default settings.