Casio XJ-460 - Manual (Page 37)

Using the Setup Menu
37
■Screen Settings J Aspect Ratio
This sub-menu lets you select the aspect ratio (ratio between the vertical and horizontal
dimensions) of the projected image.
Input Source Specific Menu Items
Setting Explanations
4:3: Sets the aspect ratio of the projected image to 4:3 (same as a standard TV
screen). This setting is normally used when S-VIDEO or VIDEO is selected as
the input source.
16:9: Sets the aspect ratio of the projected image to 16:9 (same as a movie screen
or high-definition TV screen). Using this setting when the input source image is
a 16:9 image that has been squeezed to a 4:3 image causes the image to be
projected with its normal 16:9 aspect ratio.
Setting Storage
A different setting is stored for each input source.
z When a component signal with an aspect ratio of 16:9 is sent from the input source, the
aspect ratio of the projected image is automatically switched to 16:9. In this case, this
setting cannot be changed.
z Using this projector to reduce, enlarge, or otherwise alter an image for business purposes
or public display may infringe upon the rights of the individual who holds the copyright of
the image.
Input Source Available Items (Parentheses indicate defaults.)
RGB None
Component (4:3), 16:9
S-VIDEO
VIDEO
No Signal None