Casio XJ-460 - Manual (Page 57)

Using the Setup Menu
57
To initialize the custom logo
z Initializing custom logo settings clears the currently registered custom logo and returns all
of the settings of the custom logo setting screen to their initial defaults.
1.
Perform steps 2 and 3 under “To capture a custom logo” on page
53 to display the custom logo setting screen.
2.
Use the [
S] and [T] keys to select “Initialize Custom Logo Settings”,
and then press the [ENTER] key.
z This displays a confirmation message asking if you want to initialize custom logo
settings.
3.
Use the [
S] and [T] keys to select [Yes].
4.
Press the [ENTER] key to initialize the custom logo settings, or the
[ESC] key to exit the initialize operation without doing anything.
z Pressing the [ENTER] key initializes settings and returns to the custom logo settings
screen.
z Pressing the [ESC] key returns to the custom logo settings screen without initializing
anything.
5.
Press the [MENU] key to exit the setup menu.
z Initializing the custom logo settings and deleting the custom logo causes the projector’s
preset logo to appear when “Logo” is selected for the startup screen (page 40), no
signal screen (page 40), and mute screen (page 41).