Mytek Digital FW DIO Card (ver. 1.2 / Nov 2010) User Manual
Page 17
Mytek FW DIO Card – User Manual
Feasibility of driver's operation modes depends on the
computing power at hand. If computer is too slow, dropouts
will occur in the audio signal. Typically shortages of computing
power are short and intermittent. Increasing data buffer size,
and therefore the latency, would usually result in dropout
reduction.
This function has been implemented in the driver under
different modes of operation: one normal mode and several
“safe modes”. Use the DPC tab to check computer latency and
suggested driver operation mode.
After measurements are completed and computer returns to its
normal operation, suggested driver operation mode should
appear.
Computer latency measurement.
If two or more converters are connected, each of them has to
have a unique name.
Page: 17 / 25