Signal routing – Mytek Digital FW DIO Card (ver. 1.2 / Nov 2010) User Manual
Page 13
Mytek FW DIO Card – User Manual
Signal Routing
Every connected ADDA8x192 converter provides the system
with 8 input and 8 output channels. All channels are detected as
a single Mytek interface. If more than two channels are used,
audio software which understands multichannel I/O must be
used. Channel routing is typically assigned in a dedicated
hardware control panel of the audio software application.
Mytek Driver Control Panel
The Control Panel controls the converter's operating
parameters. It will display all active devices in a chain
connected to a particular FireWire computer connector.
Control Panel with one converter attached
Device (converter) nickname is displayed and can be changed
in the Control Panel. In the case of multiple converters, each
should be given a unique name manually.
Page: 13 / 25