Muchmore Motor Master (PT-CTXM3) - Manual (Page 13)

2.CTX-Test
Select to test mode 6cell(7.2V max) or 4 cell
(4.8V max)mode.
B. Selection of test mode
Ready to test!
6cell mode
Ready to test!
4cell mode
Testing
Remain time 19
Put RPM bushing into your motor shaft
and place your motor on RPM hole, then enter.
Testing display.
1.2v
@1.2V @2.4V @3.6V
@4.8V @6.0V @7.2V
4.8v
2.4v
6.0v
3.6v
7.2v
4.8
5.5
5.2
5.6
5.3
6.0
Each value means flowed
current(Ampere) at each step.
Return to main menu, backward
Increment or Decrement Voltage,
6cell mode or 4cell mode
Test start or stop, forward
A. Key operations
Peak Amp : 12.63
Max RPM : 51120
6Step AVE Amp
Maximum RPM at 7.2V(at 6cell mode)
or 4.8V(at 4cell mode)
This data means how much current
consumed(at peak) for your motor starts.
Average current(Ampere) of 6 or 4step
Determine data number where to save.
Determine Yes or No with keys.
For data saving, you should set
"CTX-T SAVE : ON" at Setup menu.
5.40 A
6Step AVE Amp
Save:N, Data:No.
6Step AVE Amp
Save:Y, Data:No.0
Ready to test!
6cell mode
E3