Casio EXILIM EX-Z270 - Manual (Page 173)

173
Appendix
Load paper! The printer ran out of paper while printing.
Memory Full
Memory is full with images you recorded and/or files saved by
editing operations. Delete files you no longer need (page 27).
Printing Error
An error occurred while printing.
• The printer is turned off.
• The printer generated an error, etc.
Record Error
Image compression could not be performed for some reason
during image data storage. Shoot the image again.
RETRY POWER
ON
The lens came into contact with an obstruction while moving.
The camera will turn off automatically when this message
appears. Remove the obstruction and turn power back on
again.
SYSTEM ERROR
Your camera system is corrupted. Contact your retailer or an
authorized CASIO authorized service center.
The card is
locked.
The LOCK switch of the SD or SDHC memory
card loaded in the camera is in the locked
position. You cannot store images to or delete
images from a memory card that is locked.
There are no files. There are no files in built-in memory or on the memory card.
There are no
printing images.
Set up DPOF.
There are currently no files specified for printing. Configure
the required DPOF settings (page 117).
There is no image
to register. The setup you are trying to save is for an image that cannot
be saved as a user BEST SHOT scene.
This card is not
formatted. The memory card loaded in the camera is not formatted.
Format the memory card (page 148).
This file cannot be
played. The file you are trying to access is corrupted or is a type that
cannot be displayed by this camera.
This function
cannot be used.
You attempted to copy images from built-in memory to a
memory card while there is no memory card loaded in the
camera (page 110).
LOCK
B