Microtel Series 1000 - Manual (Page 17)

MICROTEL Series 1000 Dialer
Step Three - Telephone Connections include the external phone line for call-
outs and the optional local telephone connection for local programming and monitoring.
1. Connect the dialer’s LINE jack to the EQUIPMENT Phone jack of the MicroMax
Surge Suppressor using the cable supplied with your dialer.
2. Connect the Telephone LINE jack on the MicroMax Surge Suppressor to the RJ11
jack of your outside line using the cable supplied with the MicroMax Surge
Suppressor.
3. Connect a local telephone (optional) to the dialer’s PHONE jack, as shown in Figure
5 below.
Figure 4. Phone Line And Local Handset Connection
NOTE: Telephone line transients and surges can damage the dialer or disrupt its
operation. We recommend use of the MicroMax Surge Suppressor for normal operations.
11