MF Digital CD-5916 (Rev: 03/05/01) - Manual (Page 38)

CD-5916
Operator’s Guide
Document Revision: 060102
Page 37
T E S T [ S T A R T ] = O K
[ 0 ] = T E S T [ 1 ] = N O N E
The name of the currently selected image is displayed in the top left corner
of the screen. Along the bottom line of the display will scroll the available
images, identified by their number (0, 1, 2, 3, 4 and 5), and their name. The
CD-5916 defaults to the first image (0), and in this example the image is
named “TEST”. For the purposes of this example, press the “0” key to
select this image, followed by the “START/YES” key. The screen will now
read:
I M A G E N A M E : T E S T
[ S T O P ] = N O [ S T A R T ] = Y E S
•
If you made a mistake and wish to select a different image, press the
“STOP/NO” key. If the selected image is correct, press the
“START/YES” key. The screen will now read:
WA I T I N G F O R D R I V E S R E A D Y
Progress will be displayed on the screen during the operation:
C O M P n n n n n
n n n n n o o o o o o 6 2 %
Upon successful completion, the compared disc(s) will be ejected.
The screen will now read:
C O M P A R E O K , P R E S S S T A R T
•
Press the “START/YES” key, and you will be returned to the main
operating screen:
1 6 X C O P Y O R C O M P A R E
Note: If discs failed to copy properly, the recorder tray drawers stay
closed upon completion. These discs should not be used. To
help you determine the nature of the problem, error messages
can be displayed by pressing the “9” key on the keypad.