MF Digital CD-5916 (Rev: 03/05/01) - Manual (Page 22)

CD-5916
Operator’s Guide
Document Revision: 060102
Page 21
•
Press the “7” key on the keypad. The screen will now read:
E N T E R A U T H O R I N G M O D E ?
When selected, the Authoring Mode function allows you to
externally connect an Iomega Jaz removable hard disk drive to the
CD-5916 and create a master CD from the files contained on a
DOS/Windows 3.1 or Windows 95/98 formatted cartridge. Press the
“START/YES” key to select the Authoring Mode function. To
advance to the next screen, press the “STOP/NO” key. The screen
will now read:
R E A D R I D I N F O ?
When selected the Read RID Info function reads the SmartRID or
SmartSTAMP code from a copied disc (see page 41).
•
Press the “START/YES” key to select the Read RID Info function.
To advance to the next screen, press the “STOP/NO” key. The screen
will now read:
C O P Y D I S C A T O N C E ? 1 = Y E S
When selected the Copy Disc-at-Once function converts an open
Track-at-Once disc to a finalized Disc-at-Once disc (see page 52).
•
Press the “1” key to select the Copy Disc-at-Once function. Press the
“STOP/NO” key, and you will be returned to the main operating
screen.
•
Press the “8” key on the keypad. The screen will now read:
S E L E C T R E C O R D I N G S P E E D
[ 1 ] = 1 6 x [ 0 ] = 1 2 X [ 8 ] = 8 X
The factory setting for this function is “8x”. When selected the Select
Recording Speed feature allows you to set the copying speed as
determined by the capabilities of the recorders installed in the CD-
5916.
•
Press the “1” key to select “16x”, the “0” key for “12x”, or the “8”
key for “8x” recording speed. After pressing any of those keys, the
screen will now read:
S E L E C T A R C H I V E S P E E D