MF Digital CD-5916 (Rev: 03/05/01) - Manual (Page 17)

CD-5916
Operator’s Guide
Document Revision: 060102
Page 16
General Operation
In addition to CD-to-CD copying and comparing the CD-5916 is extremely
versatile and offers many useful and powerful features.
Function Keys
Various uses for the CD-5916 will be explained throughout this Operator’s
Guide. The following section explains the purpose of the function keys.
The numeric keys on the keypad have special functions when the main
operating screen is displayed:
1 6 X C O P Y O R C O M P A R E
•
Press the “0” key on the keypad. The screen will now read:
M O D E : C O P Y = 1 , S I M U L A T E = 2
The factory setting for this function is “copy”. When the Recording
Mode of the CD-5916 is set to “copy”, any blank discs loaded into
the recorders will be written to. The “simulate” mode is a diagnostic
tool, useful for testing the readability of a master disc without
actually writing to blank discs loaded into the recorders. It is also
helpful for training purposes and for experimenting with various
system functions.
•
Press the “1” key to select “copy” or the “2” key to select “simulate”.
After pressing either key, you will be returned to the main operating
screen.
•
Press the “1” key on the keypad. Something similar to the following
will be displayed on the screen in sequence:
P R O 7 . 0 X X P 0 3 / 0 5 / 0 1
This is the version information of the firmware currently installed on
the CD-5916.