MF Digital 5907-VL CD/DVD Tower - Manual (Page 8)

MF Digital 5907-VL Revised 10-21-05
7
6. OPERATING GUIDE
1. COPY
The following operation shows how to copy a Master Reading Source to a blank CD/DVD
disc. If you would like to make Disc-to-Disc copies simply ensure that the Master Reading
Source is set as the READER
a. Turn on the duplicator before you start copying and ensure that the correct reading source and blank disks
have been set.
b. The system will automatically display how many blank discs were detected.
c. When the system is ready to copy, just press ENT to execute CD/DVD copies.
d. When the system starts the copying process, it will start loading the disc. It will then analyze the discs,
and
then start copying. During the copying process, the LCD screen will display the Master Source Disc’s data
size and copying progress.
e. When the copying is finished, the Writer Trays will automatically eject.
1. Copy 79:45
7 discs detected ÎPress ENT to load disc
and execute copying Î Copy 79:45
Loading Disc
Îanalyzing
source
discÎ
Copy 79:45
Analyze Disc… ÎStart
Copying Î Copy 79:45
10% 08:00
Î Finished
and Eject
discs
• Note 2:. If your duplicator has an HDD installed and if you would like to make Hard Drive-to-Disc
copies, please refer to 12.1.1 HDD Image Manger for more information
2. TEST
a. This function is a simulation of the COPY process. The process is similar to the COPY function, with the
exception of the writing on the recordable discs.
b. Pressi or j to navigate the function menu to 2. Test and press ENT
c. The system will auto detect the numbers of blank disc and start to simulate the COPY process. However,
there is no data that will be written onto the blank disc.
d. The purpose of this process is to ensure an error free duplication.
2. Test 79:45
7 discs detected
Î Press ENT to load disc
and execute copying
simulation Î
Test 79:45
Loading Disc
ÎAnalyzing
source discÎ Test 79:45
Analyze Disc… ÎStart
SimulationÎ Test 79:45
10% 08:00 Î Finished and
Eject discs