MF Digital 5907-VL CD/DVD Tower - Manual (Page 11)

MF Digital 5907-VL Revised 10-21-05
10
7. SELECT SPEED
This operation allows you to adjust and select the Duplication Speed for the three
different disc types: CD, Audio CD, and DVD.
a. Press either button i , j to navigate the menu. 7. SELECT SPEED, and press ENT
b. You will see three disc types: CD, Audio CD, and DVD. Press either button i , j to select a disc type
and
c. press ENT to confirm your selection.
d. Press either button i , j to select the burning speed.
[Burn Speed]
7.Set Burn Speed
Î Press ENT &
i, j
Î
CD = 52
Î Press ENT
Setting normal data
CD burning speed
[Burn Speed]
Îi , jÎ
Audio CD = 40
Î Press ENT
Setting Audio CD
burning speed
[Burn Speed]
Îi , jÎ
DVD = 8
Î Press ENT
Setting DVD
burning speed •
Note: This is only
available on DVD
duplicators
•
8. SELECT SOURCE
This function to sets an Optical Drive or Hard Drive Disk as the Master Reading Source.
a. Move to 8. Select Source and press ENT.
b. Press
i, j to select either a HDD or an Optical Drive with assigned number as the reading source
Source Drive ==> 8.Select Source
Î Press ENTÎ
HDD:ST380021A
Source Drive ==>
Î movei, j
to selectÎ D#1:DVD-ROM
Î Press ENT to
finished setting
• Note: If HDD was selected as Source, then follow 12.1 Select Image ‘s instructions to be familiar
with how to select image files as your reading source..
• Note: Each Optical Drive will be assigned a Drive # according to their installation sequence. If
there is no HDD installed, then Drive#1 is automatically set as the Reading Source.
9. AUDIO TRACK EDIT
This process will guide you on how to select audio tracks from various audio CDs and
combine them into one customized Audio CD.
9.1 Select and Copy Track:
a. Movei, j to 9.Audio Track Edit menu.
9.Track Edit