MF Digital 5907-VL CD/DVD Tower - Manual (Page 18)

MF Digital 5907-VL Revised 10-21-05
17
refer to 7. ABOUT HDD MANAGER to get more information about the special
function and advantages about this feature.
12.1 Select Image
This function shows how to select an Image file as a Source that can be copied to discs.
This function is required when a copy is made from your HDD to blank discs. Please refer to
12.1.1 for instructions regarding how to make Hard Drive-to-Disc Copies.
[Image Manager] [Select Image]
1.Select Image
Î press ENTÎ A001 DVD 4469M Î
move i,j to
select and press
ENT to confirm
Make Hard Drive-to-Disc Copies
a. Make sure Hard Drive is set to Master Reading Source. When it is finished, select the image then HDD will
automatically be set as the Reading Source.
b. Return to the main menu and press the up or down buttons to select 1. Copy function.
c. Insert blank discs into writer trays. (If there is a disc in the Reader tray, it will not be read)
d. Press ENT to start copying. If 11.2 Auto Start, is selected when a blank disc is placed in any of the writer
trays, the duplicator will automatically begin the copying process.
e. When completed, trays will eject.
• Note: Once you have selected a HDD Image, the HDD will automatically be set as the Reading
Source. If you would like to make Disc –to- Disc Copies, you have to go back to 8. Select Source to
select the CD/DVD-ROM as your Reading Source.
12.2 Disc => Image
This function will show you how to load your master source disc onto the Hard Drive and
save it as an image file.
a. Place Master Source Disc into any Drive,
b. Select 12.2 Disc -> Image and press ENT
[Image Manager] [Disc ==> A001] [Disc ==> A001]
2.Disc => Image
Î press ENT Î
10% 446MB
О 100%О
Finished !
• Note: The source disc can be placed in any Reader or any one of Writer Drive
.
12.3 Reader Speed
When you wish to perform this function, 12.2 Disc -> Image, set the Reading Speed from the
reading master source disc
[Image Manager]
3.Reader Speed
• Note: this function is ONLY available when loading the Source Disc to a HDD
** The source disc loaded to HDD as image file A001.