MF Digital 5907-VL CD/DVD Tower - Manual (Page 14)

MF Digital 5907-VL Revised 10-21-05
13
10.4 Eject All Discs
Ejects disks, including master source disc and discs in writer trays.
[Utility]
4. Eject All Disc
Î Press ENTÎEject all discs
10.5 Disc Info
This feature allows checking disc’s basic information, such as the disc type, data length,
and available capacity.
[Utility] [ 1 ] 79:59
5. Disc Info.
Î press ENTÎ
CD-R Use 27:53
10.6 Drive Info
This feature allows checking the duplicator’s major component information, such as its
manufacturer, Writer or Reader model number and version.
a. Press ENT and then press up or down to check each Drive’s model number and information.
b. The duplicator will assign each drive a number from #1to#8. #1 is Reader. #2~#8 are writers.
[Utility] [#1]Port8.0 3.38
6. Drive Info.
Î Press ENTÎ
CD-ROM Max 52X
Î press i,jto select
different Drives
10.7 System Info
This feature provides information about the duplicator, such as the controller model number,
RAM capacity, and Firmware version
[Setup] P727DVD 64MB
7. System Info.
Î press ENTÎ
Ver:1.00
10.8 Update BIOS
When manufacturer’s certified update CD is inserted, this operation will automatically
update your duplicator’s software.
a. Turn on the duplicator select 10. Utility, and press ENT,
b. Insert an update CD to any Drive
c. Select 8. Update BIOS and press ENT
d. The system will then start executing the firmware update. When finished, the updated CD will automatically
eject.
e. In 2 sec, the system will re-boot. The new firmware update is complete.
[Setup] Upgrade BIOS
8. Update BIOS
Î Insert update CD Îpress ENTÎ
Waiting Disc…
О