MF Digital Cougar 6600 Manual - Manual (Page 7)

corresponding number on the keypad. Enable or disable the
function by pressing the “Start/Yes” or “Stop/No” key.
• 0 Key - The factory setting for this function is disabled. When
enabled, the Verify After feature automatically compares discs to
the master disc or hard disk image after copying is completed.
Due to the nature of the various compact disc formats, only CD-
ROM Mode 1, CD-ROM Mode 2, CD-ROM XA Mode 2 Form 1,
and audio (CD-DA) discs can be compared.
• 1 Key - The factory setting for this function is disabled. When
enabled, the Multiple Images feature allows up to seven active
images to be stored on the hard disk drive at one time. This
setting will remain in effect until disabled, even after restarting
the Cougar 6600.
• 5 Key – Displays print options. This feature is not available or
active on Cougar 6600.
• 7 Key - Gives you the option to separate the bins for DVDs and
CDs. This is called Spindle Selection. When this selection is
enabled, the bins are separated as follows. Input Bin #1 is for
CDs, Input Bin #2 is for DVDs. Input #3 and Input #4 are
disabled. The main Output Spindle will be used for both CDs and
DVDs.
Page 7