MF Digital Cougar 6600 Manual - Manual (Page 21)

Copying From a Hard Disk Image
Warning: If you have not already created a hard disk image, do
so now, as described in the previous section.
After a hard disk image has been created, it is used as the master source.
Multiple Images Disabled
To make copies from a hard disk image that was previously created with the
Multiple Images feature “disabled” (i.e. from a single hard disk image), the steps
are as follows:
• From the main operating screen depicted below:
• Load as many blank discs as are required into the CD / DVD
recorders.
• Press the “COPY” key on the keypad. The screen will now read:
• Press the “Start/Yes” key to begin copying from the hard disk
image, to the blank discs in the recorders. Depending on the
format type of the image, something similar to the following will
be displayed on the screen:
Page 21