MF Digital Cougar 6600 Manual - Manual (Page 10)

• If you pressed “Stop/No” to “Set Drive Order”, you will be
prompted to “Change Network Settings”. Pressing “Start/Yes”
will allow you to set-up the network client feature. Pressing
“Stop/No” will bring you back to the “Select Copy or Compare”
screen.
• Press the “8” key on the keypad. The screen will now read:
• The factory setting for this function is “MAX” for CD and DVD.
When selected, the Select Recording Speed feature allows you to
set the copying speed as determined by the capabilities of the
recorders installed in the Cougar 6600. You will be prompted to
select the CD-R Recording Speed first, then DVD-R Speed. The
“Stop/No” button will not function for this option. BD Speeds do
not need to be set.
• CD Speed = Press the “0” key, the “1” key or “2” key depending
on your choice. After your selection the screen will now read:
• DVD Speed = Press the “0” key, the “1” key or “2” key
depending on your choice. After your selection the screen will
now read:
Page 10