MF Digital Cougar 6600 Manual - Manual (Page 15)

Creating a Hard Disk Image
The Cougar 6600 comes equipped with an internal hard disk drive, which can be
used to store copies of master discs for later recording or comparing. Each master
is saved as a single image file. Up to six active images can be stored on the hard
disk at one time. The image file is store uniquely on the internal hard disk drive as
an .IMG file.
A hard disk image is useful as a convenient way of copying standard master discs.
For example, create hard disk images for three or four master discs which are
needed on a regular basis, and access them to make copies as required.
Creating a Single Hard Disk Image
Although the Cougar 6600’s internal hard disk can store up to six active images of
master discs, hundreds of stored images can be archived on Cougar. It is
sometimes prudent not to use this Multiple Image feature and only allow one
image to be created and stored. For example, using a single image simplifies the
copying process.
To create a single hard disk image (multiple images disabled), the steps are as
follows:
• From the main operating screen depicted below:
• Press the “COPY” key. The screen will now read:
Page 15