Maxim Integrated Analog Essentials Getting Started Guide for Zedboard - Manual (Page 7)

Analog Essentials Getting Started Guide
7
Zedboard Version
2. Downloading the bitstream (.bit) file to the board.
a. Click on the Program FPGA icon (which looks like a green chain of devices):
b. The Program FPGA dialog box will appear. From here, an FPGA bitstream is selected as well as an FPGA
bmm file and a (.elf) file to load into the Cortex-A9 memory as shown below. Be sure to select the
toplevel.bit file, the edkBmmFile_bd.bmm, then select Program.