Maxim Integrated 78M6612 M-API Library - Manual (Page 41)

UG_6612_036 78M6612 M-API Library User Guide
Rev. 1.00 41
5 Default Values
The following default values are used to build the MAPI library:
struct MPU_CParms_t MPU_CParams =
{
Unsigned Char Channels = 0
float C_Wcal = 120W
float C_Vcal = 120V
float C_Ical = 1A
Unsigned Integer t C_Pcal = 0
float C_Wtolerance = 10mA
float C_Vtolerance = 10mV
float C_Itolerance = 10mA
float C_Ptolerance = 0.1 degree
Unsigned Char C_Vavg_cnt = 3
Unsigned Char C_Iavg_cnt = 3
Unsigned Char C_Wavg_cnt = 3
Unsigned Integer C_Vmax_cnt = 10
Unsigned Integer C_Imax_cnt = 10
Unsigned Integer C_Wmax_cnt = 10
Unsigned Integer C_Wrate_cal = 4860 (shall not change)
Unsigned Integer C_Tempcal (read-only)
};
#define DefaultTIQ
10 //Default Time Increment Query
struct VIT_t xdata mapi_tVIT =
{
0x01, //Channel 1
0.00, //Current_I;
0.00, //Current_V;
};
struct Relay_Config_t xdata RlyConfig =
{
0x00, //unsigned char Relay_CTL;
0x64, //unsigned int SeqDlyTime;
0x01, //unsigned int DeEnergizedTime;
0x01, //unsigned int EnergizedTime;
0x00, //InvertPNonLatch
};