Maxim Integrated 78Q8430 Linux Driver ARM Platform - Manual (Page 13)

UG_8430_008 78Q8430 Linux Driver ARM Platform User Guide
Rev. 1.0 13
[on|off] Toggles manual crossover state on or off.
pwrsave [on|off] Toggles PHY low power mode on or off. PWRSAVE requires external clocking.
Do not attempt PWRSAVE if the 78Q8430 is configured for internal clocking.
P: PAUSE support
Syntax:
8430-tool ethn -P frame [user|default]
macadr user_frame_MAC_addr
threshold
n
time n
local [on|off]
send
Description:
This command option causes the driver to configure and manage the PAUSE packet and its details.
Operands:
frame [user|default] Keyword to specify default frame or user configuration. user
selects user configuration. default selects the default frame.
macadr user_frame_MAC_addr Keyword to set user frame MAC address. MAC_addr is a
distinct MAC address to replace the standard PAUSE frame
MAC address.
threshold n Sets the RX Queue depth, n, beyond which a PAUSE frame will
be sent automatically.
time n Sets PAUSE duration, n, in 512-bit time units.
local [on|off] Toggles the local PAUSE operation on or off.
send Forces a PAUSE frame to be sent immediately. This option
requires that the frame option be specified first.