Lippert Components 3 X 3 Slideout System - Manual (Page 10)

SERVICE
TROUBLESHOOTING
The Lippert 3 x 3 Slideout System is only one of four interrelated slideout
room system components. These four components are as follows:
chassis, slideout room, coach and Lippert 3 x 3 Slideout System. Each
one needs to function correctly with the others or misalignment problems
will occur.
Every coach has it’s own personality and what may work to fix one
coach may not work on another even if the symptoms appear to be the
same.
When something restricts room travel, system performances will be
unpredictable. It is very important that slides rails, inner and outer, be
free of contamination and allowed to travel freely the full distance. Ice or
mud buildup during travel is an example of some types of contamination
that may occur.
When beginning to troubleshoot the system, make sure the battery is
fully charged, there are no visible signs of external damage to the
actuator, motor or rails and that the motor is wired properly and all
connections are secure.
You can adjust room extension by modifying the position of the rack gear
on the inner rail to the spur gear on the gear assembly.
IF YOU HAVE ANY PROBLEMS OR QUESTIONS CONSULT YOUR
LOCAL AUTHORIZED DEALER OR CALL LIPPERT AT:
(866) 524-7821.
Mechanical Maintenance
Although the system is designed to be almost maintenance free, actuate
the room once or twice a month to keep the seals and internal moving
parts lubricated.
Check for any visible signs of external damage after and before
movement of the travel trailer.
NOTE: For long-term storage: It is recommend that the room be closed
(retracted).
10