KERN & SOHN MWS 400K100DM - Manual (Page 58)

Navigation in menu:
 When the scale is switched on, press and hold the [ →0←] key pressed for
about 3 seconds until the display shows successively the „SETUP” and
„UNIT” symbol.
 Press the [TARE] key repeatedly until the required function is displayed.
 Confirm the selected function with the [HOLD] key. The first parameter will be
displayed. Select the required parameter with the [HOLD] key and confirm the
selection with the [TARE] key.
To exit the menu and save the settings, press the [TARE] key until the „ END”
symbol is displayed and then confirm with the [HOLD] key. The scale is automatical-
ly returned to the weighing mode.
Selection is carried out with the [HOLD] and [TARE] key.
* Factory setting
*
*
*
*
*
*
*
*
*
*
*
MPS / MTS / MXS / MWS-BA-e-1417 58