KERN & SOHN MWS 400K100DM - Manual (Page 22)

 Introduce cable completely
into the tripod tube (6)
 Reinsert cap (1)
 Screw-in screw (2)
When screwing the
screw ensure that the plug-in
connector inside the tripod
foot is not squeezed.
 Use the 4 screws to attach
the tripod to the bottom of
the balance
 Level balance with foot screws until the air
bubble of the water balance is in the pre-
scribed circle.
 Check levelling regularly.
MPS / MTS / MXS / MWS-BA-e-1417 22