KERN & SOHN MBC 20K10M - Manual (Page 23)

MBC-M-BA-e-1312 23
9 Operation
9.1 Weighing
 Start balance by pressing
The balance will carry out a self-test
The scales are ready for operation as soon as the weight
display for
“0.0kg“ has appeared.
 However, you can reset the weighing scale to zero by pressing
the key.
 Put the baby in the centre of the weighing pan.
 Wait for stability display "STABLE", then read the weighing
result.
 If the baby is heavier than the max. weighing range, the display
shows "oL" (overload) and a beep sounds.
9.2 Taring
The tare weight of any preloads can be deducted by pressing a button so that the
actual weight of the baby is displayed in subsequent weighings.
(example)
 Put object (such as towel or padding) on the weighing pan.

Wait until stability display „STABLE“ appears
 Press , the zero display appears.
(example)
 Put baby on the weighing pan.
Wait until the stability display „STABLE“ appears, then read
the weighing result.
„NET” is shown at the bottom on the left.