KERN & SOHN KXP V20 - Manual (Page 14)

9 Service documentation
• This chapter is only intended for a balance specialist!
• The weighing bridges are carried out in DMS sensor technology, at
every corner a DMS weighing cell is installed.
• The analogue-digital transformation occurs in the display unit. Also all
the balance and country-specific data are stored there.
9.1 Overview, setting regulation, tolerances
Testing and setting regulations:
Capacity
600 kg 1500 kg 3000 kg 6000 kg
Readability
200 g 500 g 1000 g 1000 g
Min 4 kg 10 kg 20 kg 40 kg
Max
600 kg 1500 kg 3000 kg 6000 kg
1/3 corner load
200 kg 500 kg 1000 kg 2000kg
Tolerance
200 g 500 g 1000 g 2000g
14 KXP V20_600-3000-IA-e-1410