KERN & SOHN HCN 200K500IP - Manual (Page 30)

HCB_HCN-BA-e-1340 30
5.3 Turn on/off
Start-up

Press the
ON/OFF key. The display lights up and the balance carries out a
selftest. The selftest is completed when the weight value 0 appears on the
display.
Switching Off

Press the
ON/OFF key for a long time.
5.4 Taring

Suspend preload.
Press the
TARE button, the zero display disappears. The weight of the container
is now internally saved.

Weigh the material, the net weight will be indicated.

After removing the preload weight appears as negative display.

To delete the tare value, remove load from the suspended balance and press the
TARE button.
5.5 Weighing

Load the suspended balance.
The weight value will be displayed at once.
Overload warning
Overloading exceeding the stated maximum load (max) of the balance, minus
a possibly existing tare load, must be strictly avoided. This could cause
damage to the balance.
Exceeding the maximum load is indicated by the display „E“
. Unload balance
or reduce preload.