Key; the right digit starts flashing. use, Key; now the third digit is flashing. use – KERN & SOHN VHS 2T1 Addendum User Manual
Page 2
1. TWO-POINT ADJUSTMENT
The scales must be turned on and you have already carried out a reset to zero.
Now, press the
PRE-
TARE
key for approximately 20 seconds.
The scales show the value for the first adjustment point, the NET display
arrow is flashing.
Use the
PRE-
TARE
,
TOTAL
and
TARE
function keys to enter the existing adjustment
weight as follows:
Briefly press the
TARE
key; the right digit starts flashing.
Use
PRE-
TARE
or
TOTAL
key to set this digit according to the first adjustment weight, e.
g. for 1472 kg, set "2".
To confirm, briefly press the
TARE
key; now the second digit is flashing.
Set these to „7“ using
PRE-
TARE
or
TOTAL
.
To confirm, briefly press the
TARE
key; now the third digit is flashing.
Use
PRE-
TARE
or
TOTAL
to set this digit to “4”, the hundreds digit to “4“, the thousands
digit might have to be set to “1“ as required, as before the first digit. To
confirm all segments, press the
TARE
key until only the NET display arrow
flashes.
Import the adjustment weight (in this case the 1472 kg above).
To confirm, press the
TARE
key for c. 4 sec. The display returns to “AF00“.
Display shows again the first adjustment value.
Press
the
TOTAL
key, the
~ display arrow is flashing; for a two-point adjustment,
the medium adjustment value must be set to “00000“.
Briefly press the
TARE
key; the right digit starts flashing.
Press the function keys
PRE-
TARE
,
TOTAL
and
TARE
to enter the medium adjustment
value (00000 kg) as described above , press the
TARE
key to confirm all
segments until only the
~ display arrow flashes.
To confirm, press the
TARE
key for c. 4 sec. The display reverts to “AF00“. The
display shows again the medium adjustment value.
Press
the
TOTAL
key, NET +
~ display arrows are flashing; for a two-point
adjustment the last adjustment value must be set to “00000“.
Briefly press the
TARE
key; the right digit starts flashing.
KERN VHB_VHS
2