KERN & SOHN VHS 2T1 - Manual (Page 9)

6.5 Overview of display
Example: KERN VHB
THE DISPLAY
The three displays provide the following information:
◄ The weighing system (incl. load) is stable
▬ The indicated weight has a negative value
NET ◄ The indicated value is a net weight
DISPLAY- MESSAGES
The following messages may appear on the display:
HELP 1 Weighing system overloaded
HELP 2 Taring impossible due to negative gross weight
HELP 3 Negative signal of load cells to A-D converter / slant
HELP 4 Entered tare weight is too high. Press the PRE-
TARE key again in order to
cancel the HELP display and enter a new, reduced tare weight.
HELP 7 The signal of the load cells on the A-D converter is too high.
LO-BA The storage battery status is too low; charge storage battery.
VHB/VHS-BA-e-1012 9