KERN & SOHN VHS 2T1 - Manual (Page 10)

6.6 Keyboard overview
Each key provides an operating as well as an input function.
Operating function
TARE
Zero setting and
automatic tare Confirm and enter numeric
values. Shifts the flashing digits
to the left
PRE-
TARE
Input of tare Entering numeric values:
Decreases the numeric value of
flashing digit by 1.
TOTAL
KERN VHB
Adding Entering numeric values:
Increases the numeric value of
flashing digit by 1.
KERN VHS
Adding
Printing Entering numeric values:
Increases the numeric value of
flashing digit by 1.
ON/ OFF
UNIT
On / Off
Delete
IMPORTANT
The actuation of a key will only be accepted if the load is stable and the message
“load stable” is lit up. The display unit only carries out functions as long as the load is
stable.
WARNING
If the weighed weight exceeds the set maximum, the display will show: “ERRO2”. To
prevent damage to the display unit or the weighing cells, please lighten the load of
the weighing system instantly.
SLANT
The verifiable model of the weighing system will display stripes only if a slant
exceeds 2°. If this is the case, place the weighing system on an even base.
VHB/VHS-BA-e-1012 10