KERN & SOHN KFA 6000V20L - Manual (Page 11)

KFA V20-IA-e-1312 11
7.1 Load/unload weighing beams
The weighing beams are designed for an evenly spread load
Avoid falling load, shock loads and impacts from the side.
Weighing beams must not be moved when loaded.
 Place the load onto both weighing beams by using a pallet truck, crane or fork lift.
Ensure that the load is not swinging when it is placed onto the weighing beams.
 Lift the load first vertically at least 10 cm above the weighing beams before it is
removed or newly placed.