KERN & SOHN NFB 1.5T0.5LM Platform - Manual (Page 12)

KFD V20-IA-e-1312 12
9 Service, maintenance, disposal
Before any maintenance, cleaning and repair work disconnect the
appliance from the operating voltage.
9.1 Daily check
 Ensure that all four feet are in contact with the floor.
 Ensure that the connecting cable to the display unit and the network connection
cable of the display unit are not damaged.
 Ensure that the balance is free from dirt, especially under the edges of the
balance.
9.2 Cleaning

Remove regularly corrosive substances.

Keep IP protection.

Protect weighing cells against splash water.

Wipe the surfaces with a damp cloth.

Only use common household cleaners.

Do not use water jet or high-pressure cleaner.
9.3 Service, maintenance
 The appliance may only be opened by trained service technicians who are
authorized by KERN.
 Ensure that the weighing system is regularly calibrated, see chap. 4.5 Testing
instruments control.
9.4 Disposal
 Disposal of packaging and appliance must be carried out by operator according to
valid national or regional law of the location where the appliance is used.