KERN & SOHN FOB 30K10LM - Manual (Page 14)

Overview of the possible software settings:
(there may be small differences referring to the model):
Navigation Menu
GROSS
NET
0
Press TARE 3sec
SET
End
md-2 md-1
15.0 10.0
6.0 5.0
3.0 2.0 3.0 2.0
1.5 1.0
0.002 0.005 0.01
1g 2g 5g
0.5g 1g 2g
0.2g 0.5g 1g
19200 9600 4800 2400
Off On
Off On
trAd trAtE trAn GrAv divS A_OFF CAP CAP
Overload setting by
hardware option
Off 300 240 180 120
If the TRAD setting is OFF, this must be set to ON before a verification.
Reset into verifiable setting:
Press the key and keep it pressed until „A_OFF“ appears on the display.
Press key repeatedly until „TRAD“ appears.
Now press key, in the display appears “OFF”.
Now press the key, „ON“ appears.
Then press subsequently , , .
The balance is now ready for verification.
In order to check the settings, repeat the process.
FOB-BA-e-1118 14