KERN & SOHN EMB 500-1GN - Manual (Page 11)

After removal of the tare cup the total weight appears as a negative value with „-„
mark.
6.2.3 Units
Different foreign weighing units are integrated into the various balance models .
Change the Units with .
Press an hold , few seconds later change the unit.
Display
Conversion factor
1 g =
Gramm g 1.
Unze oz 0.035273962
Troy Unze ozt 0.032150747
Pennyweight dwt 0.643014931
6.2.4 Dosage und Zero-tracking
When the Auto-Zero-function is activated, any slight changes of the zero readout are
automatically tared.
In the event that small quantities are removed or added to the material to be
weighed, incorrect weighing results can be displayed due to the “stability compensa-
tion“ in the balance. (Example: Slowly draining fluids from a container on the bal-
ance.)
Having dosages with slight changes of weight it is recommended to deactivate this
function.
With switched off Zero-Tracking the display however is more unstably.
Activate/deactivate Zero-Tracking
 When the balance is switched off, press
and keep it pressed
 Do not release . Press also the -key and keep it pressed
 Keep the
-key pressed, however release
 Press
anew
 Keep both keys pressed until in the display “tr” appears
 Release both keys. The balance is situated in the menu.
 Press the -key until „tr“ appears
 Confirm with
EMB-500-1GN-BA-e-1410 11