Keri Systems LC-508 Wiegand Elevator Control - Manual (Page 23)

Wiegand Elevator Control Panel
2305 Bering Drive 01942-001 Rev. D
San Jose, CA 95131 USA
(800) 260-5265 (408) 435-8400 FAX (408) 577-1792
Web: www.kerisys.com E-mail: [email protected]
Page 23 of 24
LC-502W/LC-508W
Quick S
tart Guide
Figure 15: LC-508W to LC-508W Panel Communication Wiring
NOTE: The floor/panel numbering for the second LC-508W will be from 9 to 16 (not 1 to 8 as
shown in Figure 11 on page 17). The third LC-508W will be numbered from 17 to 24 and the fourth
LC-508W will be numbered from 25-32. Based on the way these panels are wired, the top left
controller in the first panel (see Figure 4 on page 9) must be the master controller, and must be
assigned address 1. All other controllers, including the top left controller in the second panel must
have a unique address (typically addresses 5 through 32 as necessary).