Keri Systems KWX-2.4 - Manual (Page 7)

KWX - 2.4 GHz Wireless 485 Network Transceiver
Quick Start Guide
Page 7 of 14 P/N: 01949-002 Rev. A
4.0 Site Survey
Prior to installation, a site survey should be conducted to ensure proposed KWX installation locations
will provide the required site coverage. This is done using two KWX units. Refer to Figure 5 for unit
power wiring and LED functions.
NOTE: Using more than two units for the site survey invalidates the results of the survey. Only two
units are necessary and only two should be used.
Figure 5: Pre-Installation Test Unit Power Connections