Keri Systems KWX-2.4 - Manual (Page 10)

KWX - 2.4 GHz Wireless 485 Network Transceiver
Quick Start Guide
Page 10 of 14 P/N: 01949-002 Rev. A
5.0 Unit Mounting and Wiring Instructions
Once mounting locations have been identified via the site survey, the KWX units can be mounted and
then wired in the identified areas.
5.1 Mounting the Unit
Mounting can be done in two ways. The simplest is to mount the unit directly to the wall using a piece
of double-stick, foam tape (see Figure 6).
If more secure mounting is desired, the unit can be mounted directly to the wall using two screws
through the two mounting holes in the body of the unit (see Figure 7).
Figure 6: Wall Mounting Using

Double-Stick Tape
Figure 7: Direct Enclosure Mounting