Kenton Pro-2000 mk1 - Manual (Page 21)

20
PRO-2000 KADI/Wasp Connector; (PRO-2000 end of cable)
15 way high density D plug (viewed from terminals).
1 2 3 4 5
6 7 8 9 10
11 12 13 14 15
Wasp wiring;
1 Kybd Data (least significant bit) (0) 5 Kybd Data (Next significant bit) (4)
2 Kybd Data (Next significant bit) (1) 6 Kybd Data (Most significant bit) (5)
3 Kybd Data (Next significant bit) (2) 7 NC (No Connection)
4 Kybd Data (Next significant bit) (3) 8 Note on Trigger
screen all remaining wires, (insulate screen).
CONNECTING YOUR MODIFIED TB303 (5 SOCKET RETRO) TO
THE PRO-2000
PRO-2000 to TB303
CV CHANNEL A > CV IN
GATE CHANNEL A > GATE IN
AUX1 > FILTER
AUX2 > SLIDE
AUX3 > ACCENT
Set the AUX sources to which ever MIDI controller you wish to control the Filter, Accent or Slide, and
link them all to CV channel A (or which ever you are using).
Using Slide;
The AUX2 controller range should be set to 0 minimum, and 50 maximum. Reset value should be 0. To
turn the SLIDE on/off, the MIDI controller must be set to 65 for on, and 0 for off. When the slide is on, all
following notes will glide into each other. It is best to play legato style for good results.
Using Accent;
The AUX3 controller range should be set to 0 minimum, and 50 maximum. Reset value should be 0. To
turn the ACCENT on/off, the MIDI controller must be set to 65 for on, and 0 for off.