Kenton Pro-2000 mk1 - Manual (Page 13)

12
LFO x WAVESHAPE # (1 to 9 as below, default: triangle[1])
- sets the wave shape for the LFO
1, Triangle 2, Sawtooth up
3, Sawtooth down 4, Square
5, PulseWidth 10% 6, PulseWidth 20%
7,1 PulseWidth 30% 8, PulseWidth 40%
9, Sample + Hold
(random depth)
LFO x MIDI SYNC (off, 1 to 96, default: off)
- allows the LFO waveform to be synchronised to MIDI clock, with a variable divide ratio. If MIDI sync
is selected and is in operation, the 2000 will automatically recalcul;ate the LFO speed in order to fit a
whole LFO waveform between MIDI clocks (or multiples of clocks depending on the setting of sync
divide. (See below for divide ratios).
If set to 1, there will be 1 cycle of the LFO for every 1 MIDI clock. (i.e. 24 cycles per quarter note)
If set to 24, there will be 1 cycle of the LFO for every 24 MIDI clocks. (i.e. 1 cycle of the LFO per
quarter note)
Note; MIDI sends 24 clocks per quarter note.
Below is a table of values you can set the divide ratio to to obtain LFO cycles of various musical
lengths:
Note type; Divide ratio;
Semibreve 96
Minim 48
Crotchets 24
Crotchet triplets 16
Quavers 12
Quaver triplets 8
Semiquavers 6
Semiquaver triplets 4
Demisemiquavers 3
Demisemiquaver triplets 2
SYNC and CLOCK SETTINGS
SYNC Clock Divide
(1/2 &1 to 24, default: 2)
- sets the ratio of MIDI clocks to output pulses from the clock pulse output.
Note that cpqn = clocks per quarter note and that the MIDI clock rate is always 24 cpqn
If set to _ = 48 cpqn - there will be 2 pulses from the clock pulse output for every 1 MIDI clock
If set to 1 - there will be 1 pulse from the clock pulse output for every 1 MIDI clock (24 cpqn)
If set to 24 - there will be 1 pulse from the clock pulse output for every 24 MIDI clocks (1 cpqn)