K-Edge K13-602 - Manual (Page 6)

WARNING: IT IS STRONGLY RECOMMENDED THAT YOU PERIODICALLY CHECK ALL BOLTS FOR PROPER TORQUE!!!
Page 6 of 7
12. Confirm proper positioning of the magnet by referring to the SRM User’s Guide for paring
instructions:
o
IF PAIRING IS SUCCESSFUL – Proceed to Step #11
o
IF PAIRING IS NOT SUCCESSFUL – Repeat Steps #3 - #10
13. Ensure contact of the M5 MOUNTING BOLT is tangent to the right side of the hole that it is in
on the K-EDGE SRM PRO CHAIN CATCHER. See image below:
14. Carefully torque the M4 LOCKING BOLT using a 3mm Allen socket to 3-4N-m. Recheck for
clearance between CHAIN and K-EDGE SRM PRO CHAIN CATCHER.