K-Edge K13-602 - Manual

WARNING: IT IS STRONGLY RECOMMENDED THAT YOU PERIODICALLY CHECK ALL BOLTS FOR PROPER TORQUE!!!
Page 1 of 7
K-EDGE SRM Pro Road Chain Catcher
Installation Instructions
(K13-602)
Description:
The K-EDGE SRM Pro Road Chain Catcher series is designed with the same ‘tried-and-true’
functionality of the K13-002 with the addition of a cadence magnet for direct compatibility with SRM
PowerMeters.
Compatibility:
The K13-602 SRM Pro Road Chain Catcher series is designed to fit braze-on front derailleur mounts
(i.e. hard mounted to the frame with the vertical adjustable slot and front radius) only with a double
chainring crankset.
Some frames with a hard mounted braze-on and vertical slot may have a 'flat' front face where a radius
should be, this type of mount will NOT work with the mounting system of this chain catcher. If you do
have this type of frame please contact K-EDGE Support for a possible solution/adapter.
Some braze-on clamp adapters may not be compatible with the mounting system of this chain catcher,
a K-EDGE Braze-On Clamp adapter will be released in the near future to accommodate the new
mounting system. If you need a braze-on mount adapter contact either your local bike shop for a
solution or K-EDGE Support for availability.
The K13-602 SRM Pro Road Chain Catcher series is currently NOT compatible with Campagnolo EPS
Front derailleurs at this time. An adapter will be released in the near future.