K-Edge K13-030-31.8 - Manual

Road Chain Catcher Installation Instructions
(K13-030-31.8, K13-030-34.9, K13-031-31.8,
K13-031-34.9, K13-032-31.8, K13-032-34.9)
Description:
The K-Edge Road Chain Catcher series is designed to eliminate chain drop on the lowest chainring due to hard shifts, cross-
chain
shifting, and/or rough terrain while riding. Also, the K-Edge Braze-On Adapter Clamp allows the customization of color to match the
Chain Catcher while saving weight at the same time.
Compatibility:
The K13-030-31.8 and K13-030-34.9 Braze-On Adapter Clamp series is designed to fit braze-on front derailleur mounts only. This
includes framesets with braze-on mounts and seat tube clamps that accept braze-on derailleur
’s.
The K13-031-31.8 Road Chain Catcher series is designed to fit braze-on front derailleur
’s only with a seat tube diameter of 31.8mm.
The K13-031-34.9 Road Chain Catcher series is designed to fit braze-on
front derailleur’s only with a seat tube diameter of 34.9mm.
The K13-032-31.8 Road Chain Catcher series is designed to fit braze-
on derailleur’s for tandem bicycles with a seat tube diameter of
31.8mm.
The K13-032-34.9 Road Chain Catcher series is designed to fit braze-
on derailleur’s for tandem bicycles with a seat tube diameter of
34.9mm.
Warnings:
All K-Edge products are to be installed by a professional bike mechanic.
These instructions are generalized to accommodate a wide ranges of setups for a bike. If your setup does not match what is being
described, take extra care in the process of your setup and contact K-Edge Support if you have any questions.
Improper installation of any K-Edge product or use outside of its design intentions could lead not only to damaging the bike but could
also cause personal injury to the rider.