K-Edge K13-500-[color] - Manual

1
WARNING: IT IS STRONGLY RECOMMENDED THAT YOU PERIODICALLY CHECK ALL BOLTS FOR PROPER TORQUE!!!
GARMIN® Mount Installation Instructions
(K13-500-[color])
Description:
The K-EDGE GARMIN Mount is designed for installation of a GARMIN Edge® or GARMIN Forerunner® computer onto a 31.8mm
diameter bicycle handlebar.
Compatibility:
The K13-500 GARMIN Mount is compatible with all GARMIN Edge® 200, 500, 510, 800, and 810 computers. It is also compatible
with the GARMIN Forerunner® 310XT (with 'quick-release kit' purchased separately from GARMIN) computers utilizing the same
mounting system. NOTE: The GARMIN Forerunner® 910XT requires a spacer to properly clear the K13-500, please contact us for
further information.
Warnings:
These instructions are generalized to accommodate a wide range of setups for a bike. If your setup does not match what is being
described, take extra care in the process of your setup and contact K-EDGE Technical Support if you have any questions.
Improper installation of any K-EDGE product or use outside of its design intentions could lead not only to damaging the bike and
related components but could also cause personal injury to the rider.
!! TETHER ATTACHMENT!! – BOTH THE GARMIN 510 AND 1000 COME SUPPLIED WITH TETHERS; HOWEVER,
THE OTHER MODELS DO NOT. IF YOU DO NOT HAVE A TETHER, ONE CAN BE PURCHASED DIRECTLY FROM GARMIN
(PART # 010-11251-16). THE ATTACHMENT OF A TETHER IS STRONGLY RECOMMENDED FOR ANY GARMIN
COMPUTER! SEE SECTION TITLED ‘TETHER INSTALLATION’ IN THESE INSTRUCTIONS.
Parts Included:
K13-500
1x K-EDGE GARMIN mount
2x M4 x 12 mm bolts
2x M3 x 6 mm (Blue Thread Lock applied)
Default Insert Position
for Garmin Edge ®
Insert Position for Garmin
Forerunner ® 310XT and 910XT