Verykool i610 - Manual (Page 15)

10
 If the screen displays that the SIM card is locked permanently, please consult with your
network operator.
Mounting the T-Flash Card
Open the gold cap from the Hinge Type Connector. Lay the T-Flash card which gold contacts
face down on the Connector, then close it.
Charging the Battery
Note: Please always keep your phone connector and charger dry.
1. Connect the connector of the travel adapter to the phone.
2. Plug the travel adapter into a proper AC wall outlet.
3. When your phone indicates that the battery is fully charged, please pull the ravel adapter
out from the I/O socket of the phone.
Tip:
1. If the battery is totally empty or not enough, it may take a few minutes before the charging
indicator appears on the screen.
2. You can turn on/off, and use the phone while charging.
Warning: Make sure that the standard voltage/power of the place where you charge the
battery matches with the rated voltage/power of our travel adapter.
Switching Your Phone On/Off
Press and hold Power Key for a few seconds to switch your phone on.
 If the phone ask for a phone lock code:
Enter the phone lock code, and press OK.
 If the phone ask for a PIN code:
Enter the PIN code, and press OK. The PIN code is usually supplied with the SIM card. Please
consult your network operator for more information.
 Switching Your Phone On/Off
Press and hold Power Key for a few seconds to switch your phone off.
 If your phone ask for “Press Unlock and then * ”:
Press the SIM2 Pick up key and then press the “*” key.