Verykool i610 - Manual (Page 10)

5
IMPORTANT INFORMATION
Use of Passwords
Your mobile phone and SIM card have various passwords. Those passwords avoid
unauthorized use of your phone and SIM card. You can change PIN, PIN2 and phone
password in the “Settings > Security Settings”
Phone Code
The Phone code can be used to avoid unauthorized use of your phone. The factory setting for
the phone code is 0000. If phone lock is enabled, you will be asked to input the phone
password when you switch on your phone.
PIN (4 to 8 digits)
The PIN (Personal Identification Number) code protects your SIM card from unauthorized use.
The PIN code is usually supplied with the SIM card. When the PIN code request is enabled,
the password is asked every time the phone is turned on.
Three times wrong PIN input, the SIM card will be locked and you will need to use the PUK to
unlock it. PUK is usually set by the network operator.
1. Enter the correct PUK to unlock the SIM card, and then enter the new PIN and press OK.
2. If you are prompted to enter the new PIN again, enter it and press OK.
3. If the PUK is correct, the SIM card will be unlocked and the PIN will be reset.
PUK (8 digits)
The PUK (Personal Unblocking Key) code is required to change a blocked PIN code. Please
contact your network operator for the code.
Note: Ten times wrong input in succession, the SIM card will be invalid and you need to consult
with your network operator for a new SIM card.
PIN2 (4 to 8 digits)
The PIN2 code, supplied with some SIM card, is used for some functions, such as Call Cost,
Fixed Dial and so on. Please consult your network operator to confirm whether your SIM card
supports those services or not.
Three times wrong PIN2 code input, the SIM card will be locked and you will need to use the
PUK2 to unlock it.
1. Enter the correct PUK2 to unlock PIN2, and then enter the new PIN2 and press OK.
2. If you are prompted to enter the new PIN2 again, enter it and press OK.