Verykool i610 - Manual (Page 14)

9
GETTING STARTED
First Call
 Insert a SIM card (Switch off your phone at first, and then remove the battery). Enter the
area code and the phone number and press Pick Up Key.
Tip: Before you get started, you must insert a valid SIM card in your phone and charge the
battery first.
 SIM Card: Please refer to “Mounting the SIM Card” for more reference on installation.
 Charging the battery: please refer to “Charging the battery” for more details.
Mounting the SIM Card
Your mobile phone number, PIN (Personal Identification Number), PIN2, PUK (Personal
Unlock Key), PUK2 (Personal Unlock Key2), IMSI (International Mobile Subscriber Identity),
the network information, the phonebook data, SMS (short messages) and other data are
stored in your SIM card.
Note: This particular phone model only supports the SIM cards of 1.8V and 3V.
 Some network operators don’t offer PIN2 and PUK2, so functions using those passwords
will be unavailable.
 The SIM card and its contacts can be damaged by scratches or bending easily, so be
careful while handling, inserting or removing the card.
 Keep all miniature SIM cards out of children’s reach.
Note: Always make sure the phone is switched off before you insert or remove the SIM card,
otherwise it may damage the SIM card.
Mounting
Remove the battery cover by sliding it. Insert the SIM card, with the notch at the upper right
and the gold contacts face down, into the card slot.
Replace the battery and close the cover tightly.
Note:
 If the SIM Card is installed improperly or damaged, the prompt words “Insert SIM” will
display on the screen after you switch on your phone. Remove the SIM Card and check the
way that performs as pictures show, and then mount it again.
 If “Insert SIM” still appears on the screen after you have inserted the SIM correctly, there
may be something wrong with your SIM card. Please ask the network operator to repair it.